Smallbore Stocks
Following the success of the original System Gemini 'Ultra' stock in the 1990's and early 2000's where it was used by competitors from club level to international level, the FR703 was developed.

- More
'Bedding Area'
Each action is ‘dedicated’ to the chassis and designed to give the best possible contact which results in the most stable and consistent accuracy, round actions sit in a Vee Block. The action is sat as low as possible, combined with the shallow fore end, this in part gives the ‘Ultra’ system its very low recoil aspect. The underside of the chassis is designed to position the trigger blade perfectly, (as different actions have varying bore-to- trigger blade centre-lines.)
Close - More
'Low Recoil'
The stock is fitted as standard with the System Gemini AKTIV Free Rifle Butt Plate, the high position of the butt plate completes the ‘linear’ concept of the System Gemini Ultra FR703 to give it one of the lowest recoil characteristics in its class.
Close - More
'Cheek Piece'
Solidly supported on twin rods with a central ‘Micro-fine’ height adjustment for perfect rear sight alignment, easy to remove and replace with a second unit for different 3-P position. A unique design available in two sizes that references to the cheekbone and unlike ‘shelf’ profiled cheek pieces does not apply pressure to the jawbone.
Close - More
'Ultra' Fore End
The ‘Ultra’ fore end, designed to give the shallowest profile ever, machined out of high quality aircraft specification aluminium alloy for maximum strength and stability.
Close - More
'Butt Section'
The System Gemini AKTIV butt plate may be easily located and locked into position using a conventional ratchet handle, this is advantageous in 3-P shooting allowing for rapid removal and exchange to the butt plate set up when changing between positions or when transporting or storing the rifle.
Close - More
'Grip'
The semi-anatomical grip module on the System Gemini stock is fully adjustable, rotatable through 360º angular adjustment of 20º and with 15mm of height in 5mm increments to permit the finger to accurately on the trigger blade. All rotational movement is within the cartridge in the head of the grip, when the grip is removed and replaced its position is ‘as it was’. This is ideal for 3P shooters, as there is no need to ‘adjust’ the grip, simply remove and replace with an additional pistol grip. The grips come in 85, 90, 95, 100 and 105 mm, with size determined by the measurement across the palm. The grip is available with a ‘unique’ polymer bead coating to give a non-slip finish.
Close
Following the success of the original System Gemini ‘Ultra’ small-bore stock in the 1990’s and early 2000’s where it was used by competitors from club level to international level, the System Gemini FR703 was developed and is our cutting edge Small-bore stock, with innovative features, which set it apart from all competitors in its field.
It is the shortest stock on the market, which has been achieved without compromise in strength or balance, just the use of intuitive design.
These design characteristics, unique to the FR703, have come into their own with the new changes to the ISSF 3P timings, allowing athletes using this stock to maximize their changeover time between positions without error.
Stocks are high quality anodized in a wide variety of colours, either subtle bead blast or high gloss polished.
FR703 Prone in Platinum and Blue
FR703 Prone in Black and Gold
Grip Size Measuring
For Palm Width and Finger Length
More info and images